Insert a microSD card into the microSD slot label face down (exposed chip face up) and push in until it clicks into place.
To remove a microSD card, lightly push the card edge inwards with your fingernail. It will spring loose from the slot and you can remove it.
Recommended memory card requirements:
- microSD or microSDHC
- at least Class 10 UHS-1
- FAT32 formatted - FAT16 formatted will not work
- maximum 32GB - Important: the Bublcam does not support memory cards greater than 32GB, eg. 64GB cards will not work.
NOTE: You will be unable to capture bubls if you turn the Bublcam on before inserting the microSD card. Also, you will lose media if you eject the card while capturing.
Comments